AnyCubic Wash & Cure 3 Plus rense- og tørreenhed til print
14 dages fortrydelsesret
Du kan fortryde dit køb i 14 dage fra den dag, du modtager varen.
Engelsk produktnavn: AnyCubic Wash & Cure 3 Plus - Print cleaning and drying device
AnyCubic Wash & Cure 3 Plus Print Cleaning and Drying Device
Wash & Cure 3 Plus is a reliable washing and drying device that will allow you to take care of the proper finishing and curing of your prints. It features a large design that will easily accommodate even larger models. It is also distinguished by surprisingly quiet operation. You can also choose from different operating modes and manually adjust the cleaning or curing time.
Larger capacity
The product will allow you to easily clean even larger prints. The capacity of its basket is as much as 7.6 liters, and the total capacity of the cleaning module is as much as 12 liters. This is enough to accommodate models of different sizes! On the other hand, the dimensions of the curing area are ø220 x 260 mm.
Reliable curing
Thanks to its carefully thought-out design and improved LED arrangement, the device guarantees excellent, even curing results. What's more, the set includes an innovative UV lamp with a bendable design, which provides an energy level of 30,000 μW/cm2 and a radiation range of 1-3 cm. With its help, you can, for example, cure the details of your models.
Improved basket design
The device's basket is made of rust-resistant double-layer PP plastic, and it allows you to clean models placed on the platform. You can also choose from 2 available heights - 150 mm and 250 mm. This makes it easy to adjust the product to the size of your print and ensures maximum IPA efficiency - you only use as much as you actually need!
Cure more models at the same time
You'll also have a two-layer curing platform at your disposal so you can dry more models at the same time. This will save you time and avoid unnecessary use of the device!
Easy operation
The device offers 3 modes to choose from - cleaning, curing, and FlexiCure enhanced curing using the included UV lamp. You can also manually adjust the cleaning or drying time between 1-30 minutes. Convenient operation of the Wash & Cure 3 Plus model is enabled by a built-in touch panel.
Quiet operation
Don't worry that the noise generated by the device will interfere with your work or rest. The sealed design and optimized software of the Wash & Cure 3 Plus makes its volume level only about 65 dB. So you can enjoy peace of mind!
Included
- Device for washing and drying prints
- Cleaning module
- Cleaning basket
- Stick x4
- Curing table
- UV lamp with bendable design
- Allen wrench set
- Power supply
- User manual
| Manufacturer | AnyCubic |
|---|---|
| Model | WS3LA0WH-Y-O |
| UV light source | 14 diodes 405 nm + lamp with adjustable design |
| Operation modes | Cleaning, curing, FlexiCure |
| Rated power | 36 W |
| Input voltage | 100-240 V 50/60 Hz |
| Cleaning / curing time adjustment | 1-30 min |
| Max. dimensions of the model to be cured | ø220 x 260 mm |
| Max. dimensions of the model to be cleaned | With platform: 228 x 128 x 250 mm; Without platform: 228 x 128 x 260 mm; |
| Control panel | Touch buttons |
| Material (cleaning basket, cleaning module, curing table) | PP |
| UV lamp height | 380 mm |
| Dimensions | 312 x 267 x 434 mm |
| Weight | 5.7 kg |
Levering
Du kan se den forventede leveringsdato ved hver vare. Varerne sendes fra vores fjernlager, og du får en mail, når pakken er på vej.
Fortrydelse og reklamation
Du har 14 dages fortrydelsesret fra den dag, du modtager varen. Ved forbrugerkøb har du desuden 2 års reklamationsret efter købeloven.